Mede8er Forum

Mede8er Products => MED600X3D / MED1000X3D / MED800X3D => Networking & Internet Issues => Topic started by: ah786 on September 16, 2012, 10:17:13 AM

Title: Cant connect to my Qnap TS-509
Post by: ah786 on September 16, 2012, 10:17:13 AM
Hi

Im trying to connect to my qnap ts-509 using my Mede8er MED1000X3D, but having problems, i have connected it to my billion router via Ethernet, the samba option is on but it still doest recognise my user name and password, any help would be appreciated here. I have firmware V1.03 30Aug 2012.

Thanks
Title: Re: Cant connect to my Qnap TS-509
Post by: Mede8er1 on September 16, 2012, 12:30:47 PM
ah786

Pls use the IP based method as described in the User Manual Page14
The Login Screen Host Name method has a bug

http://www.mede8er.org/artwork/temp/Mede8er_med1000x3D_user_rev1_24Aug2012.pdf (http://www.mede8er.org/artwork/temp/Mede8er_med1000x3D_user_rev1_24Aug2012.pdf)

Mede8er1
Title: Re: Cant connect to my Qnap TS-509
Post by: ah786 on September 16, 2012, 01:59:00 PM
Hi

Thanks for your help, i have done that but i still cant access the folder which contains the movies, i have followed the instructions in the manual, and have put in my user name password correctly but it still says login fail, any further assistance would be much appreciated.

Thanks
Title: Re: Re: Cant connect to my Qnap TS-509
Post by: Maasbommel on September 16, 2012, 02:19:41 PM
Two suggestions:
- try to logon with your admin account as this normally has full access always to see if you made some setup sharing privilige error
- check if you have jumbo frames on and turn it off (try mtu size  1500)

Verstuurd van mijn GT-I9300 met Tapatalk
Title: Re: Cant connect to my Qnap TS-509
Post by: ah786 on September 16, 2012, 03:01:58 PM
Thanks got it work :-)